المنخل الجزيئي
الصفحة الرئيسية > منتجات > المنخل الجزيئي > Hydrogen Purification 5A

Hydrogen Purification 5A

Standard molecular sieve 5A is made from zeolite powder 5A (>70%) and binder. Binder is clay, which has little adsorption capacity. Binderless 5A transforms clay binder to zeolite 5A. That means zeolite 5A composition in binderless molecular sieve 5A is 100%, that greatly increased its adsorption capacity.

وصف المنتجات

Product description:

Standard molecular sieve 5A is made from zeolite powder 5A (>70%) and binder. Binder is clay, which has little adsorption capacity. Binderless 5A transforms clay binder to zeolite 5A. That means zeolite 5A composition in binderless molecular sieve 5A is 100%, that greatly increased its adsorption capacity. Hydrogen purification molecular sieve 5A is normally used in PSA hydrogen purification. Hydrogen purification 5A has the advantages of a large adsorption capacity, fast adsorption&desorption rate and high mechanical strength. Hydrogen purification molecular sieve 5A greatly increased the CO, N2 and CH4 adsorption capacity than standard molecular sieve 5A, which makes it an excellent adsorbents for PSA hydrogen purification process.  Hydrogen purification molecular Sieve 5A have the shape of beads with diameter 1.6-2.5 mm (8x12 mesh).


More Details:

1. Synonym: PSA 5A

2. Typical Chemical Formula: Ca4,5 [(Al02)12(SiO2)12].nH2O

3. CAS NO.: 1318-02-1

4. Silica-alumina ratio: SiO2/ Al2O3≈2


Application:

1. Hyrogen purification molecular sieve 5A is used for hydrogen Purification by PSA method

2. Hyrogen purification molecular sieve 5A can also be used in PSA oxygen concentrator


Stroage:

Keep hydrogen purification molecular sieve 5A in an air tight container until ready for use to avoid unintended moisture adsorption.


Regeneration & Activation:

Hyrogen purification molecular sieve 5A can be regenerated or activated either thermal regeneration method(Thermal Swing Adsorption, TSA); To remove moisture from a Hyrogen purification molecular sieve 5A, a temperature of 200-230℃ (390-570°F)is required. Hyrogen purification molecular sieve 5A can also be regnerated by lowering the pressure in the case of pressure swing processes (PSA). A properly regenerated molecular sieve can give moisture dew points below -100℃. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.


Packing:

Hydrogen Purification 5A


Send us email if you need hyrogen purification molecular sieve 5A isotherm and MSDS.

العلامات

تحقيق

منتجات ذات صله

Air Brake Dessicant Air Brake Dessicant
Oxygen Purification 5A Oxygen Purification 5A
XH Refrigerant Desiccants XH Refrigerant Desiccants
3A Molecular Sieve 3A Molecular Sieve

الاشتراك في الرسائل الإخبارية

من خلال الاشتراك في قائمتنا البريدية ، سيتم تحديثك دائمًا بأحدث الأخبار منا.

نحن لا نرسل رسائل مزعجة!

Copyright © Mingguang Feizhou new materials Co., Ltd. كل الحقوق محفوظة | خريطة الموقع | دعم فني:

Facebook
Twitter
+86 180 5893 4648
Linkin
toptechnicalengineer@outlook.com
info@fznewmaterials.com